‹
›
‹
›
LF050 Q1S Automatic Fiber Optic Cleaver
Share on
Product Description
The Q1S Automatic Fiber Cleaver is a compact, high-precision cutting tool built for fiber technicians who need consistent, low-loss cleaves in the field or in the lab. A fully automatic, one-step operation — simply load the fiber and close the lid — delivers a clean cleave in seconds, with no manual blade actuation required. A manual cutting mode is also available as a backup.
Detailed Technical Specifications
Key Features
- Fully Automatic Operation — Close the lid and the cleaver completes the cut automatically; no separate cutting lever to operate, reducing technician error and speeding up repetitive jobs.
- Tungsten Steel Blade — Precision-ground for a cleave angle of ≤0.5°, meeting the tolerance required for low-loss fusion splicing.
- 3-in-1 Fixture — A single clamp accommodates both 0.25 mm bare fiber and 0.9 mm coated fiber, so technicians don't need to swap fixtures between job types.
- Fiber-Breakage Prevention Technology — Internal design reduces the risk of fiber shatter and stray glass fragments during cutting, supporting safer jobsite handling and cleaner scrap disposal.
- Built-in LED Illumination — Integrated lighting improves fiber placement accuracy in low-light manholes, cabinets, and outdoor enclosures.
- Visual Battery Level Indicator — An on-device display shows remaining charge at a glance, so technicians know when to switch to manual mode or recharge before a job.
- Electric / Manual Dual Mode — Runs on battery power for high-volume days, with a manual cutting mode available as a reliable backup.
- Compact, Rugged Housing — Impact-resistant orange bumper guards and a lightweight body for daily use in vehicles and field kits.
What's in the Box
- 1 × Q1S Fiber Optic Cleaver
- 1 × Standard Packaging Box
- 1 × User Manual
- 1 × Hex Screwdriver (for maintenance/adjustment)
- 1 × USB Data/Charging Cable
- 1 × Threaded Push Rod (accessory tool)
Where It's Used
- FTTH last-mile drop installation and home activation
- Fusion splicing preparation for outside-plant (OSP) fiber
- Mechanical/cold splice and fast-connector termination
- Data center cross-connect and patch cable prep
- Fiber network maintenance, repair, and restoration crews
Why Buy Through LinkFiber
- Bulk & Fleet Pricing — Volume discounts for installation companies, telecom contractors, and system integrators equipping multiple crews.
- Consistent Quality Control — Every unit is inspected before shipment to confirm cleave-angle performance.
- Fast B2B Fulfillment — 3-5days
- Warranty & After-Sales Service — 3-year warranty
Request a Quote
Outfitting a crew or restocking your service fleet? Contact our sales team for volume pricing, lead times, and OEM/private-label options.
FAQ
Q：
What is a Q1S automatic fiber optic cleaver used for?
A：
A Q1S automatic fiber optic cleaver is used to cut bare optical fiber with a clean and consistent end face before fusion splicing. Good cleaving is one of the most important factors for low splice loss in FTTH installation and repair work.
Q：
Why does cleaver quality matter for fusion splicing?
A：
If the fiber cleave angle is poor or the blade is worn, even a high-quality fusion splicer may produce unstable splice loss. For B2B buyers, investing in a reliable fiber optic cleaver reduces rework, failed splices and technician time onsite.
Q：
What should buyers check when purchasing an automatic fiber cleaver?
A：
Buyers should check cleave angle performance, blade life, fiber holder compatibility, scrap fiber collection, body durability and ease of blade position adjustment. These details affect long-term maintenance cost and field productivity.
Q：
Can the Q1S automatic fiber optic cleaver be used with FTTH drop cable fiber?
A：
Yes, it can be used after the FTTH drop cable has been stripped to bare fiber and properly cleaned. The cleaver should match the fiber diameter and holder type used by the technician.
Q：
Are samples and replacement blades available?
A：
Samples and replacement blades can be supplied according to customer requirements. For bulk orders, normal lead time is usually 5-10 days depending on stock, with carton packing or project-specified packaging available.
Inquiry
To learn more about this product, you can submit your requirements here.
Recommended Products
![LF102 Signal Fire AI-12 6 motor core alignment fiber fusion splicer]( "LF102 Signal Fire AI-12 6-Motor Core Alignment Fusion Splicer")
LF102 Signal Fire AI-12 6-Motor Core Alignment Fusion Splicer![FTTH fiber optic installation tool set in protective metal hard case]( "LF036 Metal Hard Case FTTH Fiber Optic Installation Tool Set")
LF036 Metal Hard Case FTTH Fiber Optic Installation Tool Set![Signal Fire AI9 Fiber Optic Fusion Splicer with VFL OPM]( "Signal Fire AI9 Fiber Optic Fusion Splicer with VFL OPM")
Signal Fire AI9 Fiber Optic Fusion Splicer with VFL OPM![LF046 6 Motors Core Alignment Fiber Optic Fusion Splicer 0.01dB Low Loss Trunk Line Telecom Equipment]( "LF046 6 Motors Core Alignment Fiber Optic Fusion Splicer 0.01dB Low Loss Trunk Line Telecom Equipment")
LF046 6 Motors Core Alignment Fiber Optic Fusion Splicer 0.01dB Low Loss Trunk Line Telecom Equipment![LF-054-Adjustable Longitudinal Fiber Cable Stripper Round Optical Fiber Jacket Slitting Cutter]( "LF-054-Adjustable Longitudinal Fiber Cable Stripper Round Optical Fiber Jacket Slitting Cutter")
LF-054-Adjustable Longitudinal Fiber Cable Stripper Round Optical Fiber Jacket Slitting Cutter![Signal Fire AI6A+ Fusion Splicer 6 Motors Core Alignment with OPM]( "Signal Fire AI6A+ Fusion Splicer 6 Motors Core Alignment with OPM")
Signal Fire AI6A+ Fusion Splicer 6 Motors Core Alignment with OPM![Signal Fire AI7C Fusion Splicer Wholesale Price]( "Signal Fire AI7C Fusion Splicer Wholesale Price")
Signal Fire AI7C Fusion Splicer Wholesale Price![LF041 Signal Fire AI30 Fiber Optic Splicing Machine Full Set Fusion Splicer with Tool Kits]( "LF041 Signal Fire AI30 Fiber Optic Splicing Machine Full Set Fusion Splicer with Tool Kits")
LF041 Signal Fire AI30 Fiber Optic Splicing Machine Full Set Fusion Splicer with Tool Kits![LF043 High Quality China Made Optical Fiber Fusion Splicer Telecom Equipment Low Loss]( "LF043 High Quality China Made Optical Fiber Fusion Splicer Telecom Equipment Low Loss")
LF043 High Quality China Made Optical Fiber Fusion Splicer Telecom Equipment Low Loss![LF048 Wholesale SKLS3 Fiber Optic Cable Cleaver Durable Blade FTTH Network Construction Tools]( "LF048 Wholesale SKLS3 Fiber Optic Cable Cleaver Durable Blade FTTH Network Construction Tools")
LF048 Wholesale SKLS3 Fiber Optic Cable Cleaver Durable Blade FTTH Network Construction Tools![LF050 Q1S Automatic Fiber Optic Cleaver]( "LF050 Q1S Automatic Fiber Optic Cleaver")
LF050 Q1S Automatic Fiber Optic Cleaver![LF051 S09 Telecom Grade Low Cut Angle Fiber Optic Cleaver Precise Optical Fiber Splicing Cutting Tool]( "LF051 S09 Telecom Grade Low Cut Angle Fiber Optic Cleaver Precise Optical Fiber Splicing Cutting Tool")
LF051 S09 Telecom Grade Low Cut Angle Fiber Optic Cleaver Precise Optical Fiber Splicing Cutting Tool
Professional Consultation
If you are interested in our products and would like to know more details, please leave a message here, and we will get back to you as soon as possible.
