Product Introduction

As a professional manufacturer, we provide a pigtailed fiber optic splitter based on FBT (Fused Biconical Taper) technology. The built-in pigtail design (0.9mm/2.0mm optional) enables direct fusion splicing without additional connectors. 

Core Advantages

1. Easy installation – Built-in pigtail (0.9/2.0mm) for direct fusion splicing, reducing signal loss and installation time.

2. Stable equal splitting – Supports 1x2, 1x4, 1x8, 1x16 equal split with precise signal distribution.

3. Mature FBT technology – Low insertion loss and good uniformity for long-term stable use.

4. Customizable options – Pigtail length (0.5-5m), connector type (SC/APC/UPC, LC/FC), and splitting ratio (equal/unequal).

5. Certified reliability – Compliant with Telcordia, YD/T, RoHS, CE, FCC; 100% factory tested.

   
   

Technical Specifications

FAQ 

Q1: What applications are available for high-density Optical Splitters?

A: FTTH, ODN, fiber boxes, telecom rooms, enterprise networks. 

Q2: What is the difference between a Splice Pigtailed PLC Splitter and a connectorized one?

A: The Splice Pigtailed PLC Splitter features bare or 0.9mm/2.0mm pigtails designed for direct fusion splicing in ODN systems. This provides a more permanent, low-loss connection compared to mechanical adapters. For modular needs, we also support Male / Female PLC Splitter Connectors on the same unit.

Q3: How do you ensure the quality of each splitter before shipping?
A: 100% factory test: Insertion Loss (1x4 Splitter Loss typical ≤6.5dB), PDL, and ferrule visual inspection. Each PLC Signal Splitter meets Telcordia, RoHS, CE, FCC.

Q4: How durable is the mechanical performance of your Fiber PLC Splitter?

A: Built with high-precision ceramic zirconia ferrules, our splitters are rated for ≥1000 mating cycles. The PLC Splitter Module is backed by Telcordia GR-1209-CORE, ensuring long-term environmental stability in both indoor and outdoor fiber distribution boxes.

Q5: Can I customize the splitting ratio and ABS PLC Splitter colors?

A: Yes. As a manufacturer, we offer full customization for the PLC Splitter ABS Box. You can specify ratios like 1x4, 1x8, or 1x32, choose G.657A bend-insensitive fiber, and select Color-coded Options (Green, Blue, Yellow, etc.) for rapid port identification during installation.